Renovated white kitchen with black benchtop

Kitchen Renovation Cost Calculator

Estimate what your kitchen renovation will cost in Australia, item by item. Choose the finish level, benchtop and scope, then replace any line with a real quote.

1

Finish level

2

Kitchen size

m
m²

Add up all benchtop runs, including any island.

3

Finishes

Cabinets
Benchtop
Splashback
Appliances
4

Scope

Remove a wall?
Contingency
5

Your quotes (optional)

Got a real price? Type it in to replace our estimate for that line.

$
$
$
$
$
Quick answer: most Australian kitchen renovations cost about $12,000–$25,000 at budget level, $25,000–$45,000 for mid-range and $45,000–$80,000 for premium, before contingency. A typical mid-range kitchen with 6 m of porcelain benchtop and new appliances comes to around $39,000, or about $45,000 with a 15% contingency.

How much does a kitchen renovation cost in Australia?

The finish level you choose sets most of the budget. These are typical totals for a full kitchen renovation, before any contingency:

Finish levelTypical totalWhat it usually means
Cosmetic refresh$8,000–$20,000Keep cabinets and layout, new doors or respray, benchtop and splashback
Budget$12,000–$25,000Flat-pack cabinets, laminate benchtops, same layout
Mid-range$25,000–$45,000Custom cabinetry, stone-look benchtops, mid-range appliances
Premium$45,000–$80,000Designer cabinetry, natural stone or sintered tops, premium appliances
Luxury$70,000–$150,000Fully custom, often a new layout and integrated appliances

Ranges from whatsthedamage.com.au (Nov 2026). Three Birds Renovations gives similar brackets ($15,000–$30,000 budget, $35,000–$65,000 mid-range, $65,000+ high-end), and Canstar cites hipages at $15,000–$40,000 for most jobs. See how we estimate. Renovating a bathroom too? Use the bathroom renovation cost calculator.

Kitchen renovation cost breakdown

Typical prices for the main parts of a kitchen renovation, from budget to premium:

ItemBudgetMidPremium
Custom cabinetry$12,000$19,000$35,000
Cabinet respray or wrap$2,000$4,500$10,000
Appliances$3,000$6,000$10,000
Plumbing$1,500$3,000$5,000
Electrical$1,500$2,500$4,000
Demolition & waste$1,000$2,000$4,000
Tiled splashback$400$800$2,500
Glass splashback$800$1,400$1,800
Flooring (per m²)$40$70$120

Figures from whatsthedamage.com.au (Nov 2026), prices including GST.

Cabinetry usually takes 30–40% of the budget and labour across all trades 40–50%, according to Three Birds Renovations. That is why keeping the existing carcasses and changing only the doors or finish is the biggest single saving.

How much do kitchen benchtops cost?

Benchtops are priced per square metre. A standard bench is about 600 mm deep, so each metre of run is roughly 0.6–0.65 m².

MaterialPrice per m²
Laminate$300–$560
Timber$550–$1,200
Granite$600–$1,400
Porcelain or sintered stone$960–$1,550
Marble$800–$2,500
Engineered stone is banned in Australia Since 1 July 2024 the manufacture, supply, processing and installation of engineered stone benchtops, panels and slabs is prohibited, because cutting it exposes workers to silica dust. Existing engineered stone benchtops do not need to be removed. Natural stone, porcelain, sintered stone, laminate and timber are the usual alternatives.

What makes a kitchen renovation cost more?

  • Cabinetry. Custom joinery, soft-close hardware and tall pantry units add up quickly, and the cost grows with every metre of run.
  • Benchtop material and size. Marble or sintered stone can cost three or four times as much per square metre as laminate, and an island adds a lot of benchtop.
  • Changing the layout. Moving the sink, cooktop or dishwasher means new plumbing, gas and power. Removing a non-load-bearing wall runs about $3,000–$8,000, and a load-bearing wall $8,000–$25,000.
  • Appliances. A basic oven, cooktop, rangehood and dishwasher package costs a fraction of integrated or premium brands.
  • What's behind the walls. Old wiring, failing plumbing or asbestos in older homes can add $3,000–$10,000 once the old kitchen comes out.
  • Where you live. Trade rates differ between cities and regional areas. Local quotes are the only reliable number.

Ways to save on a kitchen renovation

Keep the layout

Leaving the sink, cooktop and dishwasher where they are avoids most of the plumbing, gas and electrical changes.

Refresh, don't replace

If the cabinet boxes are sound, new doors or a respray costs a fraction of new cabinetry.

Compare quotes

Get at least three itemised quotes and enter them above to see where they differ.

Before you start

  • Ask for itemised quotes so you can compare them line by line with this calculator.
  • Check each trade's licence on your state's register before you sign.
  • Confirm who supplies the appliances and benchtops, and whether the quote includes waste removal.
  • Tiling the splashback yourself? Measure it and use the tile calculator to work out tiles and boxes.
  • If your home was built before 1990, have suspected asbestos tested before demolition starts.
  • Ask your council or a building certifier whether your work needs approval, especially if a wall is coming out.
Walls, plumbing, gas and electrical need licensed professionals Have a structural engineer or builder confirm whether a wall is load-bearing before anyone touches it. Plumbing, gas and electrical work must be done by licensed trades in every Australian state.

How we estimate

The calculator adds up each item for your finish level, scales the parts that depend on size, then adds your contingency. The published ranges shown with the result leave contingency out.

  • Cabinetry and splashback: whatsthedamage.com.au's budget, mid and premium figures, which we treat as a 6 m benchtop run and scale to your length. The scaling is our assumption.
  • Benchtop: length × 0.65 m (600 mm bench plus overhang) × the low, typical or high price per m² for your material and level.
  • Appliances, plumbing, electrical and demolition: fixed figures by level from the breakdown above. Flooring: your floor area × the per-m² rate.
  • Wall removal: the low end, middle and high end of the published ranges for budget, mid and premium. Council fees: $500, $1,250 or $2,000, from Three Birds Renovations' $500–$2,000+ range.
  • Engineered stone ban: checked against Safe Work Australia's prohibition page (Asbestos and Silica Safety and Eradication Agency) in November 2026.

Sources (accessed November 2026): whatsthedamage.com.au kitchen cost guides (Nov 2026), Three Birds Renovations (Jul 2026), Canstar (Jul 2026), Engineered stone prohibition. Prices include GST where the source says so. These are estimates for planning only.

Frequently asked questions

How much does a kitchen renovation cost in Australia?

Most full kitchen renovations in Australia cost about $12,000 to $25,000 at a budget level, $25,000 to $45,000 for mid-range and $45,000 to $80,000 for premium, before a contingency. A cosmetic refresh that keeps the cabinets and layout can come in under $20,000. Cabinetry, benchtops and appliances are the biggest variables.

How much does a small kitchen renovation cost?

With the calculator, a small kitchen with 4 m of benchtop and 7 m² of floor comes to roughly $18,000 at budget level and $30,000 at mid-range before contingency, with porcelain benchtops and the same layout. Smaller kitchens save on cabinetry and benchtop, but plumbing, electrical and appliances cost much the same at any size.

What is the most expensive part of a kitchen renovation?

Cabinetry is usually the largest single item, at around 30–40% of the budget. Benchtops and appliances come next. Labour across all trades often makes up 40–50% of the total, and moving walls or services can add more than any single item.

Can I still get an engineered stone benchtop?

No. Australia banned the manufacture, supply, processing and installation of engineered stone from 1 July 2024 because of the silicosis risk to workers. Existing engineered stone benchtops do not have to be removed. Natural stone such as granite and marble, porcelain, sintered stone, laminate and timber are all still available.

How much contingency should I allow for a kitchen?

Allow 10–20% on top of your quotes. Published cost ranges usually leave contingency out, and older homes can hide problems such as old wiring, plumbing or asbestos that only show up during demolition.

Do I need council approval to renovate a kitchen?

A like-for-like kitchen replacement often does not need approval, but removing or altering a wall, especially a load-bearing one, usually does. Check with your council or a building certifier. Plumbing, gas and electrical work must be done by licensed trades in every state.

Results are estimates to help you plan and compare quotes. They are not a substitute for advice from a licensed tradesperson or engineer.

Tiler pressing a wall tile into place

Ready to get quotes?

Compare at least three licensed kitchen renovators

Read the checklist