How to calculate how many tiles you need
A 600 × 600 mm tile covers 0.36 m². With a 3 mm grout joint, each tile effectively covers 0.603 × 0.603 = 0.364 m². A 3 m × 2.5 m bathroom floor is 7.5 m², so it needs 7.5 ÷ 0.364 = 20.6 tiles, and with 10% extra you would buy 23.
Always round up to whole tiles and then to whole boxes. Running out halfway through a job is a real problem with tiles, because a later batch can differ slightly in shade.
How to calculate square metres for tiles
- Floors: length × width, in metres. Measure wall to wall at floor level.
- Walls: width × tiled height, minus windows and doors.
- L-shaped rooms: split into rectangles, work out each one, then add them together.
- Splashbacks and niches: measure each panel separately; small areas create more cuts, so allow extra.
How many tiles per square metre?
| Tile size | Area per tile | Tiles per m² |
|---|---|---|
| 75 × 300 mm (subway) | 0.0225 m² | 44.4 |
| 300 × 300 mm | 0.09 m² | 11.1 |
| 300 × 600 mm | 0.18 m² | 5.56 |
| 450 × 450 mm | 0.2025 m² | 4.94 |
| 600 × 600 mm | 0.36 m² | 2.78 |
| 600 × 1200 mm | 0.72 m² | 1.39 |
Before grout joints and waste. The calculator includes both.
How much extra tile should I buy?
The layout pattern decides how many tiles get cut. Common allowances:
About 10%
Straight lay or brick bond in a regular room.About 15%
Diagonal or herringbone layouts, or rooms with lots of corners.15–20%
Small or awkward areas, large-format tiles, or pattern matching.Keep a few leftover tiles from the same batch. If a tile cracks in a few years, an exact match can be hard to find.
Before you buy
- Buy all the tiles at once and check the batch or shade code on every box matches.
- Check the label for tiles per box and m² per box, and enter it above to get the number of boxes.
- Large-format tiles need a very flat surface. Ask your tiler whether the floor needs levelling first.
- Rectified tiles (with precise square edges) allow narrower grout joints than standard tiles.
Frequently asked questions
How do I calculate how many tiles I need?
Work out the area in square metres (length × width for a floor, width × height for a wall), divide it by the area of one tile including its grout joint, then add 10% for cuts and breakages. For a 3 m × 2.5 m floor with 600 × 600 mm tiles and 3 mm joints: 7.5 m² ÷ 0.364 m² = 20.6, plus 10% = 23 tiles.
How do I calculate square metres for tiles?
Measure the length and width of the floor in metres and multiply them. For walls, multiply the width by the height and subtract windows and doors. Split L-shaped rooms into rectangles, work out each one and add them together.
How many 600 × 600 tiles are in a square metre?
About 2.78 tiles, because each tile covers 0.36 m². In practice you buy by the box, and you need extra for cuts, so use the calculator to get a whole number of tiles and boxes.
How much extra tile should I buy?
Around 10% for a straight or brick-bond layout, and around 15% for diagonal or herringbone layouts, which need more cuts. Small, awkward rooms and large-format tiles can need more. Keep a few spare tiles for future repairs.
How many tiles are in a box?
It depends on the tile and the brand. Boxes are labelled with the number of tiles and the square metres they cover, so check the label and enter the tiles per box in the calculator to see how many boxes to buy.
Does the grout gap change how many tiles I need?
Slightly. Each grout joint adds a little coverage, so wider joints mean marginally fewer tiles. The effect is small for large tiles and bigger for small tiles and mosaics, which is why the calculator includes the joint width.
Results are estimates to help you plan and compare quotes. They are not a substitute for advice from a licensed tradesperson or engineer.