Modern house with a wide concrete driveway

Concrete Driveway Cost Calculator

Estimate what a new concrete driveway will cost in your city, for plain, coloured, stamped or exposed aggregate finishes, including the extras quotes often leave out.

1

Finish

2

Size and location

m
m

Single driveways are usually at least 3 m wide; double driveways 5–6 m.

City
3

Site and extras

Use
4

Your quote (optional)

$/m²

Replaces our estimate for the driveway itself. Extras are still added.

Quick answer: a plain concrete driveway typically costs $100–$125 per m² laid in Australian capitals, and exposed aggregate $145–$185 per m². A typical 40 m² driveway comes to roughly $4,000–$5,000 plain or $5,800–$7,400 exposed aggregate depending on the city, before removal and crossover costs.

How much does a concrete driveway cost per m²?

Laid prices for supply, placement and finishing, including GST:

FinishNational (low–high)Typical
Plain$75–$150$110
Coloured$95–$200$140
Stamped / stencilled$120–$200$155
Exposed aggregate$120–$200$160

Source: whatsthedamage.com.au (verified November 2026). Yellow Pages (May 2026) gives a similar picture: plain $110–$130, coloured $120–$180 and exposed aggregate $120–$200 per m².

Concrete driveway cost by city

Typical price per m² and a 40 m² driveway (about 10 × 4 m) at that rate:

CityPlain per m²Exposed agg. per m²40 m² plain / exposed
Sydney$125$185$5,000 / $7,400
Canberra$120$175$4,800 / $7,000
Melbourne$115$170$4,600 / $6,800
Perth$115$170$4,600 / $6,800
Brisbane$110$160$4,400 / $6,400
Adelaide$100$145$4,000 / $5,800

Driveway only. Removal, excavation and council crossover are extra.

Is an exposed aggregate driveway worth it?

Exposed aggregate is made by washing the top layer of cement paste off the concrete before it fully sets, revealing the stones in the mix. It typically costs about 40–50% more than a plain finish, but it is one of the most popular driveway finishes in Australia.

Why people choose it

A textured, non-slip surface that hides tyre marks, dirt and small stains well.

What to know

It is usually sealed when laid and needs resealing every few years to keep its colour.

Choosing the mix

Ask to see a sample board or a finished driveway: stone colour and size change the look a lot.

Extra costs to ask about

ItemTypical cost
Removing old concrete (incl. disposal)About $32–$105 per m² (Melbourne)
Sloping blockAbout $10 per m² extra
Council vehicle crossover (NSW)$1,800–$5,500, quoted separately
Crossover application fee$250–$850 (NSW); $369.60 (City of Melbourne)
Excavation and spoil removalVaries with depth and access; ask for it itemised
  • Ask whether the quote includes excavation, base material, mesh, control joints and sealing.
  • Check the crossover with your council first: many specify the slab thickness, mesh and width.
  • Get at least three itemised quotes and enter them above to compare per m².

How thick should a concrete driveway be?

Thickness sets how much concrete you order. Use the concrete calculator for the volume and the concrete price per m³ calculator to check the supply cost in your city.

UseSlabTypical mesh
Cars, utes100 mmF62 or SL72
Caravan, boat, heavier vehicles125 mmSL82
Rural, tractors, trucks150 mmSL92 or two layers of F72

Common practice from The Quote Yard (April 2026), with 25 MPa concrete standard and 32 MPa for heavy-duty or coastal sites. Council crossovers often need 150 mm with SL82 mesh. Your concreter or council may specify something different.

How we estimate

  • Driveway: your area × the low, typical and high price per m² for your city and finish. Sydney and Melbourne use whatsthedamage.com.au's city figures; plain and exposed aggregate use each city's own figures; coloured and stamped prices for other cities are national figures scaled by that city's plain price (this reproduces Sydney's published prices within a few dollars).
  • Heavy duty: about 37% more per m², the gap between The Quote Yard's standard reinforced ($90–$150) and heavy-duty ($130–$200) NSW ranges.
  • Sloping block: $10 per m² (Yellow Pages).
  • Removal: your area × the removal rate, scaled from the Melbourne and Sydney figures by city.
  • Crossover: The Quote Yard's NSW range of $1,800–$5,500 plus an application fee of $400–$700 (metro range). Your council may differ.
  • Not included: excavation and spoil removal, retaining walls, stormwater work and sealing beyond the first coat.

Sources (accessed November 2026): whatsthedamage.com.au concreting guides (verified Nov 2026), Yellow Pages (May 2026), The Quote Yard (Apr 2026). Prices include GST. Estimates are a guide only; get itemised quotes from licensed concreters.

Frequently asked questions

How much does a concrete driveway cost in Australia?

A plain concrete driveway typically costs around $100–$125 per m² laid in Australian capitals, with a range of about $70–$170 per m². Yellow Pages puts the national average at $110–$130 per m². For a typical 40 m² driveway in Melbourne that is about $4,700 for plain concrete and $6,800 for exposed aggregate, before removal, excavation or council crossover costs.

How much does an exposed aggregate driveway cost?

Exposed aggregate typically costs about $120–$200 per m² nationally, with a typical price around $160 per m² and up to $230 per m² in Sydney. That is roughly 40–50% more than a plain finish, because the surface is washed back to expose the stones and is usually sealed.

How much does a double driveway cost?

Double driveways are usually 5–6 m wide. A 6 m × 10 m (60 m²) plain driveway comes to about $6,600 at the national typical rate in this calculator. The Quote Yard puts a 60 m² Sydney driveway at $5,400–$13,200 depending on the suburb and how heavy-duty it is.

Do I need council approval for a driveway?

The section that crosses the footpath and kerb (the vehicle crossover) usually needs council approval and must be built to the council's specification. NSW application fees range from about $250 to $850, and the City of Melbourne charges $369.60 for a residential vehicle crossing permit. Check with your council before you book a concreter.

How often should a concrete driveway be sealed?

Acrylic sealers are usually reapplied every 2–4 years, and polyurethane or silane sealers every 5–7 years. Exposed aggregate and coloured driveways are normally sealed when they are laid, and the first coat is often included in the quote.

Is stamped concrete cheaper than exposed aggregate?

They cost about the same. National figures put stamped or stencilled concrete at about $120–$200 per m² (typically $155) and exposed aggregate at $120–$200 per m² (typically $160). Simple stamped patterns can be cheaper; intricate multi-colour patterns cost more.

Results are estimates to help you plan and compare quotes. They are not a substitute for advice from a licensed tradesperson or engineer.

Tiler pressing a wall tile into place

Ready to get quotes?

Compare at least three licensed concreters

Read the checklist