How much is concrete per m³ in Australia?
Typical prices for a standard 25 MPa ready-mix, delivered (supply only, including GST):
| City | Low | Typical | High |
|---|---|---|---|
| Sydney | $345 | $435 | $550 |
| Canberra | $330 | $420 | $530 |
| Melbourne | $315 | $400 | $505 |
| Perth | $315 | $400 | $505 |
| Brisbane | $300 | $380 | $480 |
| Adelaide | $275 | $350 | $440 |
Source: whatsthedamage.com.au city guides, verified November 2026. Yellow Pages (April 2026) puts standard mixes at $400–$450 per m³. Lower figures you may see online, around $200–$300, are usually prices before delivery and fees.
Concrete price by strength (MPa)
Stronger mixes cost a little more per m³. Yellow Pages gives these averages:
| Strength | Typical use | Average per m³ |
|---|---|---|
| 20 MPa | Footpaths, garden edging, non-structural slabs | $400 |
| 25 MPa | House slabs, residential driveways, footings | $410 |
| 32 MPa | Heavy-duty driveways, thicker slabs | $430 |
| 40 MPa | Structural and industrial slabs | $450 |
The calculator applies these differences to your city's 25 MPa price. If your slab is engineer-designed, use the strength on the plans.
Short-load fees and other delivery charges
The price per m³ is only part of the bill. Holcim publishes its service fees, which show the kind of extras every supplier charges (amounts exclude GST):
| Charge | Holcim example |
|---|---|
| Short load (under 4 m³) | $80–$90 per undelivered m³ |
| Saturday morning | $10 per m³ (SEQ) |
| Saturday afternoon | $45 per m³ (SEQ) |
| Sunday and public holidays | $90 per m³ (SEQ) |
| Waiting time | $3–$3.50 per minute after 30–45 free minutes |
| Oxide or fibre handling | $10.50–$15 per m³ |
| Extra cartage over 15 km | $3 per km per m³ (SEQ) |
Pump hire is extra again: iseekplant lists line and boom pumps at around $155–$182 per hour plus GST. Fees vary by supplier and region, so ask for them in writing with your quote.
How much does a concrete slab cost per m²?
If a concreter supplies, places and finishes the slab, you'll be quoted per m². Typical prices including GST:
| City | Plain slab | Exposed aggregate |
|---|---|---|
| Sydney | $86–$170 (typ. $125) | $140–$230 (typ. $185) |
| Canberra | $82–$165 (typ. $120) | $130–$220 (typ. $175) |
| Melbourne | $79–$160 (typ. $115) | $125–$210 (typ. $170) |
| Perth | $79–$160 (typ. $115) | $125–$210 (typ. $170) |
| Brisbane | $75–$150 (typ. $110) | $120–$200 (typ. $160) |
| Adelaide | $69–$140 (typ. $100) | $110–$185 (typ. $145) |
Nationally, coloured concrete runs around $95–$200 per m² and stamped or stencilled finishes around $120–$200 per m². Removing old concrete first adds cost (about $34–$115 per m² in Sydney). For driveways, see the concrete driveway cost calculator.
Ways to save on concrete
- Avoid short loads. If you have several small jobs, pour them on the same day to reach the 4 m³ minimum.
- Pour on a weekday. Weekend and after-hours deliveries attract surcharges. Holcim, for example, doesn't charge them on weekday pours that start before 1pm and finish by 6pm.
- Measure carefully. Over-ordering wastes money and returned concrete can be charged; under-ordering means a second short load.
- Consider mini-mix or bags for small jobs. Under about half a cubic metre, compare a mini-mix delivery or premix bags with a ready-mix short load. The concrete calculator shows how many bags a small job needs.
- Be ready on time. Have formwork, reinforcement and helpers ready so you don't pay waiting time.
How we estimate
- Concrete: your city's typical 25 MPa delivered price, adjusted for strength using Yellow Pages' averages (20 MPa about 2% less, 32 MPa about 5% more, 40 MPa about 10% more). "Other" uses national figures.
- Order: your volume plus waste, rounded up to the next 0.2 m³.
- Short load: $85 + GST for each m³ under a 4 m³ load (the middle of Holcim's $80–$90).
- Weekend surcharges: Holcim's South East Queensland rates plus GST, charged on at least 4 m³.
- Pump: $175 per hour + GST, within iseekplant's $155–$182 range.
- Laid slab: your area × your city's low, typical and high price per m² for the chosen finish.
Sources (accessed November 2026): whatsthedamage.com.au concreting cost guides (verified Nov 2026), Yellow Pages (Apr 2026), Holcim SEQ service fees (Mar 2026), Holcim Donmix service fees (May 2026), iseekplant. All calculator figures include GST. Estimates are a guide only; prices change, so confirm with local suppliers.
Frequently asked questions
How much is concrete per m³ in Australia?
A standard 25 MPa ready-mix delivered to Australian capitals typically costs around $350 to $435 per m³ including GST, with lows near $275 and highs above $500 depending on the city and supplier. Yellow Pages puts standard mixes at $400–$450 per m³. Some guides quote $200–$300, but those are prices before delivery and fees. Always get a delivered quote.
How much does a concrete slab cost per m²?
A plain concrete slab laid by a concreter typically costs about $100 to $125 per m² in Australian capitals, with a range of roughly $70 to $170 per m². Exposed aggregate usually costs $145 to $185 per m², and coloured or stamped finishes sit in between. These prices include concrete, labour and finishing for a standard residential slab.
What is a short-load fee?
Ready-mix suppliers charge extra when you order less than a full minimum load, because the truck makes the same trip. Holcim, for example, charges $80–$90 plus GST for each cubic metre below 4 m³. So a 1.5 m³ order is charged for 2.5 m³ of short load on top of the concrete.
How much does a concrete pump cost?
Line and boom pumps are usually hired by the hour, at around $155 to $182 per hour plus GST according to iseekplant. Some guides put a small residential pump job at $300 to $800 in total. You need a pump when the truck cannot get close to the pour.
What strength of concrete do I need?
As a general guide, 20 MPa is used for paths and garden edging, 25 MPa for house slabs, driveways and footings, and 32 MPa for heavy-duty driveways and thicker slabs. If your slab or footing is engineer-designed, use the strength on the plans.
Do Boral, Holcim and Hanson publish concrete prices?
Not as a public price per m³. The major suppliers quote by job and location. Holcim publishes its service fees, such as short-load and after-hours charges, and Boral publishes its transport charge, but the concrete price itself comes from a quote.
Results are estimates to help you plan and compare quotes. They are not a substitute for advice from a licensed tradesperson or engineer.